UL listed General Purpose Valves (Hazardous Location
Classified). EV8345G381 solenoid only UL listed. CSA
certified; nonincendive for Class I, Division 2 UL E25549.
Meets applicable CE directives.
Series Body Material Normal Temperature Range High Ambient Temp Version
8553 Stainless Steel
-40°F to 140°F (-40°C to 60°C)
-13°F to 140°F (-25°C to 60°C)
8551 5°F to 140°F (-15°C to 60°C)
8551 Stainless Steel -4°F to 140°F (-20°C to 60°C)
Low Limit is the same as
Normal Temperature Ratings,
but High Limit is 176°F
8314 -40°F to 140°F (-40°C to 60°C)
These solenoid valves are intended for use on clean dry air or inert
gas, filtered to 40 micrometres or better. The dew point of the media
should be at least 10°C (18° F) below the minimum temperature
to which any portion of the clean air/inert gas system could be
exposed to prevent freezing. If lubricated air is used, the lubricants
must be compatible with Nitrile elastomers. Diester oils may cause
operational problems. Instrument air in compliance with ANSI/ISA
Standard 7.0.01-1996 exceeds the above requirements and is,
therefore, an acceptable media for these valves.